Since the farmyard chicken has settled in the base, in order to keep the chicken's meat and eggs delicious and nutritious, we use our own recipes for formulating, purchasing raw materials for ourselves, and processing and formulating ourselves. To this end, the base has introduced a small feed processing unit, which consists of three major parts: crusher, hoist, and mixer. Its matching and installation techniques are as follows: The crusher crusher is the most commonly used feed processing machine. At present, there are mainly hammer mills and roller crushers. The pulverizer can pulverize the raw materials into particles of different sizes according to various feeding requirements. Due to the different types of machines, the amount of machining per hour is also different, and the type of motor used is also different. It can be purchased according to the scale of farming. General chicken farms should purchase two, one use, - Taiwan spare. 2. Mixer is divided into conventional feed mixer and additive mixer. Conventional feed mixers are available both vertically and horizontally. The mixing time of the vertical mixer is generally 15 minutes and 20 minutes, and that of the horizontal mixer is about 10 minutes. When stirring the compound feed, it should be stirred in batches. The advantage of the vertical mixer is that it is well-mixed and its power consumption is low. The disadvantages are long mixing time, low productivity, and insufficient charging and discharging. The main working part of the horizontal mixer is agitating blades. The blades are divided into two layers, inner and outer, and their spiral directions are opposite. During the work, the blades stir the feed, so that the internal and external feeds can be moved relative to each other to achieve the purpose of mixing. The advantages of the horizontal mixer are high efficiency, rapid loading and discharging, and the disadvantage is that the power consumption is large, the area is large, and the price is high, so it is generally less used. 3. Hoist is divided into two types: bucket elevator and spiral elevator. Generally, spiral elevator is used. The installation sequence of the feed processing unit is generally to install the shredding machine first, and then install the motor and transmission belt. The mixer is installed next to the pulverizer so that the discharge port of the pulverizer is just connected to the feed port of the mixer. The hoist is connected to the pit and the inlet of the shredder. During processing, the main raw material is poured into the pit, the lifting machine lifts the raw material to the crusher for comminution, and then enters the mixing bin of the mixer, and the other raw materials can be directly poured into the mixing bin from the feeding port.
Fresh Grapes,Grapes Nutrition ,Grape Juice ,Grape Plant
Fruit & Melon Co., Ltd. , http://www.nbfreshapple.com