Ordinary sprayer: (1) Handle does not work. When the gas pressure of the hand pole is compressed, if the gas cylinder is running out of water or not, most of the skin peas are shrinking, becoming hard or damaged, and the oil soaked or new skin peas should be removed. (2) Poor atomization. When the spray breaks, water vapor sprays out. The reason is that the outlet pipe in the barrel is welded and removed, and it can be removed by soldering. If the spray mist shape is not conical, the reason is that the spray hole is blocked, the nozzle hole is not round, and the debris in the spray head can be removed and the spray head piece can be replaced. (3) Water leakage from multiple sides; water leakage from the spray bar, which is caused by welding or cracking at the weld joint, should be repaired or replaced; water leaks at each joint, and the thread can be tightened or the gasket can be replaced by oil. If the switch leaks, the switch cap is loose; if the seal ring is damaged and the switch core sticks, it can be tightened, replaced, cleaned, and refueled. Mist: (1) Difficult to start. The floating chamber is not smooth because the mechanism is left unused for a long time and should be cleaned before use to ensure smooth oil passage. (2) Stop after starting. Most of the reasons are that the original platinum contacts of the ignition system are loose, contaminated, or burned. Zero large sandpaper or even a concise knife can be used to wipe off the platinum surface stains and adjust the gap of the platinum points. (3) Insufficient cylinder pressure. Due to heavy wear, new piston rings, pistons, or cylinders can be replaced.
Sake Series,Sake Alcohol ,Sake Drink,Sake Rice Wine
Condiment & Seasoning Co., Ltd. , http://www.nbsauce.com