Xiagong loader electronic scale keyboard does not work how to do
Common troubles for loader electronic scales (1) The loader electronic scale meter does not display If the loader electronic scale meter does not display, you can check the following four aspects first. If you can't find the problem, you can contact the manufacturer and arrange the personnel to repair it. No need to return to the factory
1, the power switch is not turned on
2. Is the instrument power plug not in good contact or disconnected?
3. Check if the battery cable is disconnected. (The instrument power supply is directly connected to the loading electromechanical bottle. If you need to remove the power cord when repairing the electromechanical bottle, please mark the power cord. Please register the installation position for later recovery).
4. Check if the power cord is disconnected due to carelessness.
Accuracy is our attitude, Shanghai Guihu Weighing Apparatus
(2) The weight error exceeds the set range
1. Check if your tiger sensor plug is loose.
2. Whether the sensor part is hit by a hard object has a significant impact or crack.
3. Check if the sensor cable is squeezed and disconnected.
(3) Troubleshooting of the printer of the electronic loader of your tiger loader and paper change method
1. The paper is normal, blank when printing, no writing.
a. Check if the ribbon is worn, aged, or need to change the ribbon.
b. Check if the ribbon is reversed and you need to reinstall it.
2. The paper is normal, but it cannot be printed.
Check whether the meter is set in the non-weighing state. If it is in the non-weighing state, it cannot be printed. It can be printed in the normal weighing state.
3, paper printing is difficult or print error Check the printer for too much dust, too much oil, need to clean the printer or replace the printer.
4. Jam Check if the paper is jammed by the output bin.
Paper change method for loader electronic scale:
Ribbon replacement:
After the printer has been in use for a while, the printing will be unclear and the ribbon needs to be replaced.
(4) The keyboard failure of the XGMA loader electronic scale
1, the keyboard keys do not work to check whether the keyboard plug is off, loose
2, a row of buttons does not work, no sound prompts on time, other key sounds have prompted to check the keyboard plug a foot with or without contact or corrosion
3, a button does not work, no sound prompts on time to check whether the button is worn out, need to replace the keyboard
(5) The single shovel weight of the electronic loader of your tiger loader is normal, but the accumulated weight does not change. Check whether the weighing state is in the non-weighing state. The weight of the non-weighing state is normal, but it is not cumulative.
Tricholoma Matsutake,Matsutake Mushroom,Matsutake Fungus,Fresh Tricholoma Matsutake
Guangyun Agricultural Biotechnology (Jiangsu) Co., Ltd , https://www.7-mushrooms.com