Cascading filter for normal use

Laminated filters are widely used in pharmaceutical, chemical, food, beverage, water treatment, brewing, ink, petroleum, printing and dyeing, environmental protection and other industries. They are ideal for filtration, clarification and purification of various liquids. Made of high-quality polypropylene material, it is corrosion-resistant and durable. Especially when stainless steel is expensive, polypropylene is greatly reduced in cost. The machine can be used for sterilization treatment according to different filter media and production process. It can also reduce or increase the number of filtration layers according to the size of the filtration to make it suitable for production. The sealing parts of the machine are made of medical silicone rubber or fluoro rubber, which has no leakage and good sealing performance.

The cascading filter has large filtering area, small volume, small occupied area and small space. The double stencil filter of the machine ensures large filtering surface, light weight and convenient operation. The horizontal plate and frame filter area can also be made larger, which is bulky, heavy, and inconvenient to operate.

The cascading filter also has a unique system with recoil device and heat preservation heating device (mainly, the filter film is blocked in the filter and the filter film is replaced), so that the working time is extended and the cost of consumables is increased, and the recoil device is designed. Insulation heating system, this machine is also equipped with a special microporous membrane with recoil device and heat preservation. It is mainly used in chemical, pharmaceutical and other industries. When liquid temperature is low and crystallization occurs, some liquids are at low temperature. The problem of viscosity and difficult filtration is a new type of filtration equipment that is more advanced on the market.

Cascade filters are used to eliminate impurities in the media to protect the proper use of valves and equipment. The role of the filter:

(1) Suction filter: The filter is installed on the suction line of the pump to filter out the contaminants entering the fuel tank through the air hole, which has the function of protecting the pump. Therefore, it is not a filter that controls the pollution concentration of the system.

(2) High-pressure pipeline filter (A): It is installed on the outlet pipe of the pump to prevent pollutants from entering the system. Therefore, the concentration of pollutants in the system can be controlled. However, because it is a high-pressure main line, it is subject to pump pulsation and pressure shock, so the material and strength of the filter element should be carefully considered.

(3) High-pressure line filter (B): This filter is also installed in the system to protect hydraulic components that are particularly sensitive to contamination, also known as terminal filters. Therefore it tends to be smaller than other filters. Therefore, you should choose a large capacity when using it. In addition, the material of the component has the same strength as (A).

(4) Return filter: It is installed in the return line of the system. Its function is to capture the pollutants generated or invaded in the system before returning to the tank. Therefore, it is an important filter for controlling the concentration of the system. Although it is a low-pressure pipeline, depending on the operating conditions of the transmission, pulsation or pressure shock may occur, so the material and strength of the components should be fully considered. Imported pump

(5) Circulating filter: It is located on the oil return circuit of the tank cycle. The capacity of the system is large, so it is often used when strict cleaning is required. Even if the system is not working, the pollutants in the tank can be captured. Therefore, the efficiency of reducing the concentration of pollution is good. In addition, a cooler is installed, which has the advantages of being able to perform cooling at the same time and being easy to maintain. However, special pumps and motors are required, which are expensive.

(6) Air filter: It is installed on the fuel tank to prevent the pollutants from being mixed into the fuel tank with the air due to the change of the oil volume of the fuel tank. Therefore, the filtration accuracy should have the same performance as that of the bag filter, and the capacity should have sufficient space to prevent the internal pressure of the oil tank from becoming a negative pressure due to the blockage of the hole, causing the cavity phenomenon of the pump. Pay special attention when the surrounding environment is bad.