Fungus ear ear prevention measures

First, cool down in time when the temperature is high. Close the ears and windows in the daytime, hang the wet curtain on the window, spray water to cool, open the doors and windows at night to reduce the temperature, and keep the temperature as low as 30 degrees Celsius. Under such temperature conditions, not only ear fungus out of ear, ears out, good opening, color is positive, but also the growth and reproduction of nematodes is inhibited. If the temperature exceeds 30 degrees Celsius, the breeding of nematodes will accelerate, and prone to flow.
Second, ear shelter site should have a certain degree of slope, top soil with sandy soil as well, in order to facilitate water seepage.
Third, the water source is clean and sanitary, and the clean deep well water is the best source of water.
Fourth, careful management. Fungus has different requirements for temperature, humidity and ventilation during different growth stages. During the formation of the fungus primordium, the relative humidity was maintained at about 80%, and moderate ventilation. During the formation of primordial differentiation, coral ear buds are quite young, and the relative humidity should not be too large at this time, and it can be maintained at 80%-90%. In the fruit body growth stage, in order to promote the rapid growth of the ear, we must adhere to the principle of dry and wet (three dry and seven wet), increase ventilation, and control the relative humidity at 90%-95%. When the fruiting body ears are fully expanded, the edges are thinned, the roots of the ears are shrunk, and harvesting begins when the eight points mature.
5. When a small amount of earings occurs, first remove the ear, then use 1%-2% saline solution to spray the fungus, and spray the ground with 5% lime water to control the further spread of nematodes, bacteria and protozoa, and then use Aluminum phosphide was sealed and fumigated for 24 hours.

Feature

Accurate pacing pulse recognition and automatic analysis

Manual, automatic, rhythm, and storage modes

Freezing function: 12 seconds electrocardiogram before and after freezing for back printing

Automatic mode: Review the electrocardiogram 10 seconds before printing, fast/save printing paper

Storage mode: Display parameters and diagnosis are not printed, and electrocardiogram is stored for playback.

AC/DC dual-purpose, built-in large container rechargeable lithium battery

Wide voltage can adapt to 75-265V,50/60Hz AC power supply

12 lead waveform display and 250 case storage (SD card is scalable )

USB and RS232 communication interfaces (ECGNET ECG management software can be selected)

USB host interface supports network transmission, external U disk and USB printer (optional)

High-accuracy thermal printing mechanism, supporting 210/215mm roll paper or 210mm folding paper

Ecg Machine

Dynamic Ecg,Dynamic Ecg System,Ecg Machine,Ecg Monitoring System

Changchun Yingwang Times Digital Co., Ltd. , https://www.ccsdsm.com