Liquid filling machine cleaning method introduction
- Clicks: 2036 Release time: 2014/6/3
Since the liquid filling machine is filled with liquid, many liquids are corrosive. Therefore, the liquid filling machine must be kept clean. The filling container used must be strictly inspected and cleaned, and the beverage after filling cannot be contaminated. It is also necessary to keep the filling workshop clean and tidy after the Zui. Because in the production process, the beverage production and processing company is not able to operate normally due to the quality problems of the filling machine itself, it is necessary to pay attention to sterilization and ensure clean and low temperature filling when using the filling machine.
The main methods to ensure cleanliness are: keep the liquid filling machine pipeline clean, all the pipes, especially the pipes that are indirectly or directly in contact with the materials, should be kept clean, brush every week, go water every day, and sterilize every time; The filling machine is clean, and the material tank should be brushed and sterilized to ensure that there is no dirt or bacteria in the parts in contact with the material.
In the production process, it is necessary to ensure the bio-stable sterilization of bottled beverages. It is necessary to control the sterilization time and temperature to ensure the final effect of the Zui, and to avoid excessive sterilization time or excessive temperature, and reduce beverage oxidation. When sterilizing, it should be cooled as soon as possible so that the temperature does not exceed 35 °C. Low-temperature filling is a low requirement for beverage filling. Under normal circumstances, beverages are not easy to be foamed in a low-temperature environment, which is beneficial for filling.
Before the filling machine is used, the temperature of the filling machine tank and the conveying pipe should be lowered by using water of 0~1 °C. When the filling temperature exceeds 4 °C, the temperature should be lowered first and then the filling operation is carried out. Use the heat preservation tank and constant temperature irrigation to keep the material at a constant temperature for the specified time of filling, so as to avoid the unstable operation of the filling machine due to excessive temperature change. In addition, the filling equipment is good to be isolated from other equipment. The lubrication part of the filling machine and the filling material should be protected from cross-contamination. The lubrication of the conveyor belt should use special soapy water or lubricating oil.
[ print ] [ back to top ] [ close ]
Ball Lenses are commonly used to improve signal quality in fiber coupling applications, or for use in endoscopy or bar code scanning applications. Ball Lenses feature short back focal lengths to minimize the distance needed from the Ball Lens to the optical fiber.
Half-Ball (hemispherical) lenses are ideal for applications such as fiber communication,endoscopy, microscopy, optical pick-up devices,and laser measurement systems.
Worldhawk can provide spherical ball lenses and half ball lenses in a range of substrates for performance in the ultraviolet to the NIR. Such as including H-K9L(N-BK7), Sapphire, CaF2, BaF2, ZnSe or custom materials upon request.
Ball Lenses,Glass Lens Ball,Optical Ball Lens,Optical Glass Ball Lens
ChangChun Worldhawk Optics Co.,Ltd , https://www.worldhawk-optics.com