What are the tips for using the seat belt?
Article from Qingdao Zhongbang Instrument Co., Ltd. Technology Department
Personal safety protection products used by on-site construction personnel generally include: safety helmets, safety belts, protective clothing, protective glasses, protective shoes, gloves, etc. These safety products must be used correctly, worn, and have simple knowledge of maintenance, maintenance, and inspection. The use and inspection of commonly used safety protection articles is very important to ensure the safety of construction workers in the labor process. Because it is commonly used, people often do not agree with this, it is easy to ignore its role, especially for strict use requirements are not in the heart, arbitrary, and thus easily lead to a vicious accident.
On the construction site of electric power construction, there are many high-level operations and overlapping work. In order to prevent the operator from falling at a certain height and position, the operator must hang the seat belt when working in the ascent or high position. There are several requirements for the use and maintenance of seat belts:
Ideologically must pay attention to the role of seat belts. Numerous things show that the seat belt is a "life-saving belt." However, there are a few people who have trouble with their safety belts. It is not convenient to walk up and down, especially some small and temporary activities. They think that "the time for wearing a seat belt has been completed." As everyone knows, the accident happens in an instant, so the high-altitude operations must be fastened according to the requirements.
Before using the seat belt, check that the rope has no deterioration, whether the buckle is cracked, and whether the circlip jump is good. For high-altitude operations such as seat belts without fixed hooks, wire rope of appropriate strength or other methods should be used. Do not hang the seat belt on moving objects with sharp edges or loose objects.
The belt strap must be kept intact to prevent rope wear. If the protective cover is found to be damaged or peeled off, a new set must be added before use.
Seat belts are strictly prohibited for long-term use. If a long rope of 3 m or more is used, a buffer must be added and the parts must not be removed arbitrarily.
Before using the seat belt, check that the parts are intact. After using the seat belt, pay attention to maintenance and storage. Always check the seat belt sewing part and the hook part, and check the thread for cracks and damage.
Seat belts should be kept safe when not in use, not accessible
High hanging low. Hanging the seat belt high, people working below will be called high hanging low. This is a relatively safe and reasonable method of hanging science. It can reduce the actual impact distance when a fall occurs. In contrast, low hanging high. That is, the seat belt is hung in the low place, and the person is working on it. This is a very unsafe method of hanging, because the actual impact distance will increase when the fall occurs, and people and ropes will be subjected to a large impact load. Therefore, the seat belt must be used in the same low position to prevent low hanging and high use.
The seat belt should be hung on a solid member or object. To prevent the swing or collision, the rope can not be knotted and the hook should be hung on the connecting ring. High temperature, open flame, strong acid, strong alkali or sharp objects should not be stored in a damp warehouse.
Seat belts are tested once after two years of use. Frequent use should be checked visually and found to be abnormally replaced immediately. Safety belts used on a regular or sampling basis shall not be used.
This article is an article of Qingdao Zhongbang Instrument Co., Ltd. If you need to reprint, you must add the source of the description, and you will be responsible for reprinting without permission.
Knee Massage,Leg Knee Massager,Best Knee Massager,Leg And Knee Massager
Shenzhen Jie Zhong Lian Investment Co., Ltd. , https://www.szmeizonscares.com